- Home
- Tools and courses
- Control chart and Cpk
Included in the Lean and Continuous Improvement Pack
Control chart and Cpk
Five measurements per sample: control limits, out-of-control points and Cp and Cpk capability calculated automatically, with the means chart.
€29 excl. VAT€34.80 incl. VAT, this tool only
Method guide, blank template and PDF + PowerPoint course included
Total:
See my selection (0)Company licence included
Unlimited use and editing within your company, including to train your teams. Your tools in your brand colours: on quotation
Card, PayPal, Apple Pay or Google Pay. No account. Invoice sent by email.
When to use it
To monitor a critical dimension or setting in production.
Where does it come from?
Walter Shewhart invented the control chart in 1924 at Bell Labs; capability indices spread with automotive quality in the 1980s.
Case study, fictional example
Diameter of a 20 mm shaft on a lathe
Twenty samples: Cp of 1.86 and Cpk of 1.77, a capable process. Sample 14 goes above the upper limit: a worn tool, changed within the hour.
The steps
- Enter the specification limits
- Measure five parts per sample
- Read the alerts
- React and record the cause
What the template contains
- 25 samples of 5 measurements
- Mean, range and control limits
- Out-of-control alerts highlighted
- Cp and Cpk calculated
- Means chart
Related terms
- Control chart
- Cpk
- SPC
- Process capability
The case study is a fictional example, written to show how the tool is used.
Course preview
Extracts from the PDF handbook you receive. The PowerPoint deck covers the same content, ready to present to your teams.
Optional extra · €5 excl. VAT
The practice quiz: 30 questions
Check you have mastered the method before applying it: concepts, method and worked case studies, each question corrected and explained.
- Corrected practice and timed mock exam
- Score by theme
- Questions and answers shuffled on every attempt
- File to keep, works offline
Test yourself · 3 questions
Can you answer these?
Instant answer and explanation. Free, no sign-up.
How are control limits calculated?
- ABy management
- BAt random
- CFrom the process's own data
- DFrom the customer's tolerances
Frequently asked questions
- When will I receive the template?
- Right after payment: you land on a page where you can download your files.
- Can I edit the template?
- Yes. It is an open Excel file that you can adapt to your company and project.
- What does the course include?
- It comes free with the tool: a PDF handbook and a PowerPoint deck ready to present, to understand the tool and train your teams. The Excel file also has a Guide tab (step-by-step method, mistakes to avoid, checklist) and a blank copy ready to fill in.
- What software do I need?
- Microsoft Excel 2019 or later, or Microsoft 365.
The other tools in the Lean and Continuous Improvement Pack

Lean
Mapping a process, step by step, to spot waiting, stock and waste.
€29 excl. VAT · course included

5S
Five steps for a tidy, clean and lasting workplace: sort, set in order, shine, standardise, sustain.
€29 excl. VAT · course included

Kaizen
The short improvement workshop, run with the shop-floor team, to gain quickly on a specific point.
€29 excl. VAT · course included

DMAIC
Six Sigma's five-step approach to solving a complex problem from data.
€29 excl. VAT · course included

PDCA
The improvement wheel: plan, do, check, then act, and start again.
€15 excl. VAT · course included

Pareto
The chart that ranks causes by importance, to focus effort on the few causes that weigh the most.
€29 excl. VAT · course included

Ishikawa
The fishbone diagram that sorts all possible causes of a problem by family.
€29 excl. VAT · course included

5 Whys
Five successive “why” questions to go from the symptom to the root cause.
€15 excl. VAT · course included

FMEA
Failure mode, effects and criticality analysis, to prevent problems before they happen.
€29 excl. VAT · course included

Kanban loop
For each item: consumption, lead time and container size. Number of cards, maximum stock and cover are calculated automatically.
€29 excl. VAT · course included

Standard work
The steps of each station with their value-added time, compared with takt time, and the Yamazumi chart to balance the line.
€29 excl. VAT · course included

Daily huddle board
The five-minute daily huddle: safety, quality, output, today’s status, problems and actions, on a single board.
€29 excl. VAT · course included

SMED
Changeover operations, internal or external, before and after improvement, and the downtime saved.
€15 excl. VAT · course included

Gemba walk
The shop floor visit checklist by topic: findings, actions agreed with the team and the visit score.
€15 excl. VAT · course included